Watch face editor for Amazfit watch on ZeppOS

[SashaCX75]

Alternative watch face editor for Amazfit watch on ZeppOS.

Supported watch models

- Amazfit Active
- Amazfit Active 2
- Amazfit Active 2 (Square)
- Amazfit Active Edge
- Amazfit Active Max
- Amazfit Band 7
- Amazfit Balance
- Amazfit Balance 2
- Amazfit Bip 5
- Amazfit Bip 5 Unity
- Amazfit Bip 6
- Amazfit Cheetah
- Amazfit Cheetah Pro
- Amazfit Cheetah (Square)
- Amazfit Cheetah 2 Pro
- Amazfit Falcon
- Amazfit GTR 3
- Amazfit GTR 3 Pro
- Amazfit GTR 4
- Amazfit GTR mini
- Amazfit GTS 3
- Amazfit GTS 4
- Amazfit GTS 4 mini
- Amazfit T-Rex 2
- Amazfit T-Rex 3
- Amazfit T-Rex 3 Pro
- Amazfit T-Rex Ultra
- Amazfit T-Rex Ultra 2

When unpacking the watch faces, it is advisable to immediately select the correct watch model, otherwise the colors may be distorted.

It is desirable to create a new project in a separate folder. Image names do not have to consist only of numbers, you can add short prefixes (for example, date_01, time_01).
Watch faces created in the editor and on Huami's website should unpack normally. Watch faces from Zepp and those created based on them will not be unpacked.
In a set of images for displaying one parameter (for example, images for displaying the day of the week), all images should preferably be the same size. If the size of the images is different, then the first image in the set should be the largest.

All new features in this and next release will be tested on the GTR4 and may not work on other models.

List of changes

v17.1

Fixed the bugs that were found.
Added support for Cheetah 2 Pro.

v17.0

Added the ability to create a ZAB file for publication in the store (button in settings)
Added wind speed in km/h
Added atmospheric pressure in mm Hg
Added support for T-Rex Ultra 2.

v16.1

The ability to invert time circles has been added.
Active Max support has been added.
Image file name verification has been added.
The behavior of application shortcuts in editable elements has been fixed.

v16.0

Added sleep widget.
Added text widgets.

v15.1

Added support for new watch models.
Added BioCharge widget.
Added buttons to launch new applications.

v15.0

Time circles added.
Added world time (time, city, time zone, time offset).
Added text display around the circle.
Added the ability to create watch faces in developer mode (for experienced users, allows logs to be displayed in watch faces).

v14.0

Added support for widgets: ALARM_CLOCK, TRAINING_LOAD, VO2MAX, AQI, BODY_TEMP, FLOOR, READINESS, HRV.
Added support for Balance 2.
Changed the structure of the Preview.States file.
When creating an animated preview, frames with a switchable background have been added.
Added the ability to display the city name in uppercase letters in the weather forecast.
Added links to lessons.

v13.2

Added support for Bip 6.
Fixed the progress display using the image set for most widgets. It should now be more similar to how it is displayed on the watch.
Reworked the code for displaying heart rate with a circular scale. It now uses the standard widget in place of the sensor.
Fixed PAI progress display. Note that the maximum value for the PAI pointer is 525, not 100. This is a feature of the watch, not the editor.
Added warning if files in watch face are in *.bin format.

v13.1

Added ability to make a shortcut to any application in editable items.
Added support for Active 2.
Fixed display of buttons and shortcuts when creating a GIF file.

v13.0

Added autosave (enabled in settings).
Added ability to switch background image by tap.
Added ability to switch background colour by tap.

v12.1

Added transparency for some widgets. Does not work on all models.
Added support for Amazfit T-Rex 3.

v11.2

Fixing the smooth second hand on the GTR4.

v11.1

Updated the digital time widget.
Updated shortcuts widget.
Added new application launch commands for buttons.

v11.0

Completely redesigned the weather widget.
Added weather widget for several days (forecast).
Added support for Bip 5 Unity.

v10.4

Added ability to display month names in a font.
Added Compass widget (works on ZeppOS 2 or later).
Added ability to create *.zpk file (enabled in settings).

v10.3

Added display of hours:minutes:seconds in a single line font.
Added display of date/month/year in one line font (order depends on the watch setting).
Added display of the day of the week in font.
Added new presets for button functions.

v10.2

Added ability to copy widget properties (context menu on the properties field).

v10.1

Added display of time and date in font.
Added widget for adding scripts to watch face.
Fixed bugs in sunrise/sunset operation on circle and at an angle.
Fixed bugs in digital time alignment.

v10.0

]Added support of fonts for data display (after installing such watch faces it is better to restart the watch).
Added possibility to display altitude (in barometer).
Completely redesigned the moon widget.
The arrow pointer for sun and moon should now not be displayed after sunset.
All images are now copied to the watch face, even if they are in folders.

v9.1

Fixed working with Amazfit Balance.
Added support for Amazfit Active.
Added support for Amazfit Active Edge.
Fixed display of distance on a circle.
Fixed displaying sunrise and sunset at an angle.
Added ability to convert images to ARGB format in settings.
Fixed continuous vibration in notifications.

v9.0

Added ability to create shortcuts for a set of images (IMG_LEVEL).
Added support for buttons and presets to launch inbuilt apps.
Added support for Amazfit Balance (not tested).

v8.2

Added ability to display angled or circumferential data for sunrise/sunset, maximum and minimum temperatures (for weather, separate units of Celsius and Fahrenheit only work on newer models).
Added support for Cheetah / Cheetah Pro.
Added support for Bip 5.
Theoretically it is now possible to add support for new models by editing the file in the model_config folder.

v8.1

Added ability to display data at an angle or in a circle for date and time.
Fixed found errors when unpacking dials.
Fixed found errors when working with UHD monitors.

v8.0

Added support for T-Rex Ultra
Added support for GTR Mini
Added the ability to display data at an angle or in a circle (battery, steps, distance, calories, heart rate, PAI, SpO2, stand)

v7.3

Fixed problems with icons in editable items.
Fixed problems with circular progress in editable items.
Added ability to set data rotation angle for some models (ZeppOS 2).
Improved algorithm for unpacking dials that contain additional features. Increased probability of partial dial recognition.

v7.2

Added the ability to change the type of line ending for linear and circular progress.
Added the ability to create shortcuts without using an image.

v7.1

Added independent element with image and top image.
For editable items on the clock, an additional selection in the form of a list is included.
Changed the function of creating an editable element for fat burning.
Fixed motion animation and rotation animation for GTR4 and GTS4.
Added wind direction.
Updated watch face file format.

v7.0

Added smooth second hand (several types)
Added alert every hour
Added the ability to change the direction of rotation of the hour hands
Added the ability to set the sector in which the hour hands work

v6.4

Improved the stability of the bluetooth connection loss notification function
Updated German and Spanish translation

v6.3

Added the possibility of notifications when the connection is broken and restored
Fixed work progress for fat burning
Fixed work progress for the pulse
Fixed bugs in temperature display
Fixed display of shortcuts in AOD mode

v6.1

Added Falcon support.
Changed the algorithm of shortcuts to eliminate conflicts with editable elements.
The configuration of created watch faces has been updated to version 2.

v6.0

Added support for editable background.
Added support for editable arrows.
Added support for editable elements.
Added German translation.

v5.0

Added support for GTR 4
Added support for GTS 4 Mini
Added support for Amazfit Band 7 (not to be confused with Mi Band 7)

v4.1

Fixed bugs when creating and unpacking GTR 3 Pro watch faces

v4.0

Added animation support.
Added Ukrainian language.
Added a tab with some tips on working with the editor.
Added the ability to display the distance in miles.

v 3.0

Added sunrise / sunset
Added barometer
Added stress
Wind added
Added fat burning
Added moon phases

v 2.0

Added weather.
Added workout (stand).
Added oxygen (SpO2).
Added humidity.
Added UV index.
Added the ability to highlight shortcuts when saving gif files (enabled in the settings).
Updated the display of shortcuts in connection with the firmware update on the watch.
Added Italian language.
Added Spanish language.

v 1.1

Fixed loss of error symbol for pulse.
Fixed errors when unpacking dials.
Fixed bug with incorrect model definition for GTS 3.

Version 17.1
Fixed the bugs that were found.
Added support for Cheetah 2 Pro.

Old versions

v 10.0
v 10.1
v 10.2
v 10.3
v 10.4
v 11.0
v 11.1
v 11.2
v 12.1
v 13.0
v 13.1
v 13.2
v 14.1
v 15.0
v 15.1
v 16.0
v 16.1
v 17.0

PS. The interface was translated using an online translator. If someone wants to improve the translation, then write to the PM.

PS2. Many people ask how to install watch faces. For starters, I advise you to read this topic. Personally, I prefer to use this program to install the created watch faces on the GTR 3 (for the GTS 3)

Сollection of code examples for use in watch faces.

Donate to the author - PayPal: [email protected].
Buy me a coffee

[bfermar]

Great job!!! @SashaCX75...Would it be possible in a future update of the editor to be able to add the barometric height values? Regards

[wp456]

Is it because of the specifics of this watchface or an issue in the editor that this one cannot be meaningfully opened with the editor?
(It just shows the assets but nothing more, no preview, no settings)
https://amazfitwatchfaces.com/gtr/view/31947

[K4rol]

how to easly change the red color to blue in all images?

Spoiler

[SashaCX75]

bfermar Watch faces do not have access to height values. Given that this value varies greatly depending on the weather, I consider it absolutely useless.

[SashaCX75]

K4rol To change the colors on the images, use any graphic editor, such as GIMP.

[ZduneX25]

SashaCX75 have you ever heard about gtr3 smooth seconds implementation that does not work on trex2? i received several reports now, but i always thought trex2 and gtr3 share the same code, they both run zeppos 1.0 (no such problem on gtr3pro for example)

[SashaCX75]

ZduneX25 Should be ZeppOS 1.0 but works similar to ZeppOS 2.0

[ZduneX25]

I heard they added external bluetooth devices (HR belt etc) support in TREX 2 firmware so it is probably mix of both zeppos 1 and 2 now.

[SashaCX75]

Version 7.1
Mirror
Added independent element with image and top image.
For editable items on the clock, an additional selection in the form of a list is included.
Changed the function of creating an editable element for fat burning.
Fixed motion animation and rotation animation for GTR4 and GTS4.
Added wind direction.
Updated watch face file format.

All new features in this and next release will be tested on the GTR4 and may not work on other models.

[Guydu91]

Hello Sasha,
I'd like to create a watch face with the following shortcuts:
- Membership cards
- Compass
- Alexa
- Diary and/or Calendar
Could you give me the necessary codes for this?
Thank you in advance for your answer.
Best regards.

PS1: I haven't seen these questions asked in the previous threads... but I may have missed something...
PS2: Congratulations again for this superb work!!

[SashaCX75]

Guydu91
Try these commands.

Codice: Seleziona tutto

hmApp.startApp({ appid: 1, url: 'CompassScreen', native: true })
hmApp.startApp({ appid: 1, url: 'OnlineVADScreen', native: true })
hmApp.startApp({ appid: 1, url: 'ScheduleCalScreen', native: true })
hmApp.startApp({ appid: 1, url: 'ScheduleListScreen', native: true })

[Guydu91]

Thank you Sasha for your quick answer.
I'll try these commands as soon as possible.
Best regards.

[joselito1996]

@Guydu91
Try these commands.

Codice: Seleziona tutto

hmApp.startApp({ appid: 1, url: 'CompassScreen', native: true })
hmApp.startApp({ appid: 1, url: 'OnlineVADScreen', native: true })
hmApp.startApp({ appid: 1, url: 'ScheduleCalScreen', native: true })
hmApp.startApp({ appid: 1, url: 'ScheduleListScreen', native: true })

Good morning, first of all thank you for the program, as it works very well, but I would like to know where you can get all the shortcuts you mention, so I can experiment, I understand that there will be a list of the names of the commands somewhere, right?

[gildo52]

Is It possibile to have a "tutorial" about usage of "editable element" ?

[SashaCX75]

Version 7.2
Mirror
Added the ability to change the type of line ending for linear and circular progress.
Added the ability to create shortcuts without using an image.

[ivblumen]

hello, is there or will there be support for GTR Mini on the editor? Someone said creating faces for Falcon should work, but another person reported they were not compatible.
Thanks and congratulations for the wonderful software.

[joselito1996]

@Guydu91
Try these commands.

Codice: Seleziona tutto

hmApp.startApp({ appid: 1, url: 'CompassScreen', native: true })
hmApp.startApp({ appid: 1, url: 'OnlineVADScreen', native: true })
hmApp.startApp({ appid: 1, url: 'ScheduleCalScreen', native: true })
hmApp.startApp({ appid: 1, url: 'ScheduleListScreen', native: true })

Good morning, first of all thank you for the program, as it works very well, but I would like to know where you can get all the shortcuts you mention, so I can experiment, I understand that there will be a list of the names of the commands somewhere, right?

But I would like to be able to see the possibilities of all the codes out there, even downloaded apps, where do you get those codes from?

[SashaCX75]

But I would like to be able to see the possibilities of all the codes out there, even downloaded apps, where do you get those codes from?

This data is taken from the available watch firmware. The list can be viewed here, but it is better to search for this information in your language.
https://melianmiko-board.notion.site/61 ... 511b8149e3

[Guydu91]

Hello Sasha,
I can't get the shortcut for Alexa to work, the watch face is unresponsive while the other shortcuts work.
Did I forget something?
I used what you said:
hmApp.startApp({ appid: 1, url: 'OnlineVADScreen', native: true })
Thank you in advance for your answer.
Best regards.
Guy.

[SashaCX75]

Guydu91 I have Alexa trying to start but a message pops up saying there is no account connected in Zepp.

[Guydu91]

@Guydu91 I have Alexa trying to start but a message pops up saying there is no account connected in Zepp.

As far as I'm concerned, it's rather as if there were no shortcut: if I click on the shortcut I created, nothing happens.
On the other hand, I can use Alexa when I look for the function in the watch menu...
Can't we use another shortcut?

[Guydu91]

@Guydu91 I have Alexa trying to start but a message pops up saying there is no account connected in Zepp.

Hello Sasha,
The problem is solved, the shortcut to Alexa is correct: you just have to install the Alexa application on the phone and give access in the Zepp application... and it works!
Best regards.
Guy.

[Hviegas]

Hi, it works very well for me, but i have two questios:
- how to create a shortcut for brightness
- why shortcut for PAI is not working on amazfit band 7?

[Guydu91]

Hi, it works very well for me, but i have two questios:
- how to create a shortcut for brightness
- why shortcut for PAI is not working on amazfit band 7?

Hello,
The shortcut for the brightness is the following: {url: 'Settings_lightAdjustScreen', native: true} but you will find all the codes for the different shortcuts in the link indicated by Sasha a little higher.
For the PAI shortcut, the watchface editor provides for it (I have already integrated it into the CW4U_SPORT_COLORS watchface for GTS4 and GTS4 Mini).
So it should work normally unless Amazfit Band 7 needs special setting.
To see maybe in the Zepp application...
Best regards.

[Lukimator]

@bfermar Watch faces do not have access to height values. Given that this value varies greatly depending on the weather, I consider it absolutely useless.

Is that correct? I have 2 or 3 watch faces displaying altitude installed on my T-Rex 2. I don't know how they made those though