Watch face editor for Amazfit watch on ZeppOS

[SashaCX75]

Alternative watch face editor for Amazfit watch on ZeppOS.

Supported watch models

- Amazfit Active
- Amazfit Active 2
- Amazfit Active 2 (Square)
- Amazfit Active Edge
- Amazfit Active Max
- Amazfit Band 7
- Amazfit Balance
- Amazfit Balance 2
- Amazfit Bip 5
- Amazfit Bip 5 Unity
- Amazfit Bip 6
- Amazfit Cheetah
- Amazfit Cheetah Pro
- Amazfit Cheetah (Square)
- Amazfit Cheetah 2 Pro
- Amazfit Falcon
- Amazfit GTR 3
- Amazfit GTR 3 Pro
- Amazfit GTR 4
- Amazfit GTR mini
- Amazfit GTS 3
- Amazfit GTS 4
- Amazfit GTS 4 mini
- Amazfit T-Rex 2
- Amazfit T-Rex 3
- Amazfit T-Rex 3 Pro
- Amazfit T-Rex Ultra
- Amazfit T-Rex Ultra 2

When unpacking the watch faces, it is advisable to immediately select the correct watch model, otherwise the colors may be distorted.

It is desirable to create a new project in a separate folder. Image names do not have to consist only of numbers, you can add short prefixes (for example, date_01, time_01).
Watch faces created in the editor and on Huami's website should unpack normally. Watch faces from Zepp and those created based on them will not be unpacked.
In a set of images for displaying one parameter (for example, images for displaying the day of the week), all images should preferably be the same size. If the size of the images is different, then the first image in the set should be the largest.

All new features in this and next release will be tested on the GTR4 and may not work on other models.

List of changes

v17.1

Fixed the bugs that were found.
Added support for Cheetah 2 Pro.

v17.0

Added the ability to create a ZAB file for publication in the store (button in settings)
Added wind speed in km/h
Added atmospheric pressure in mm Hg
Added support for T-Rex Ultra 2.

v16.1

The ability to invert time circles has been added.
Active Max support has been added.
Image file name verification has been added.
The behavior of application shortcuts in editable elements has been fixed.

v16.0

Added sleep widget.
Added text widgets.

v15.1

Added support for new watch models.
Added BioCharge widget.
Added buttons to launch new applications.

v15.0

Time circles added.
Added world time (time, city, time zone, time offset).
Added text display around the circle.
Added the ability to create watch faces in developer mode (for experienced users, allows logs to be displayed in watch faces).

v14.0

Added support for widgets: ALARM_CLOCK, TRAINING_LOAD, VO2MAX, AQI, BODY_TEMP, FLOOR, READINESS, HRV.
Added support for Balance 2.
Changed the structure of the Preview.States file.
When creating an animated preview, frames with a switchable background have been added.
Added the ability to display the city name in uppercase letters in the weather forecast.
Added links to lessons.

v13.2

Added support for Bip 6.
Fixed the progress display using the image set for most widgets. It should now be more similar to how it is displayed on the watch.
Reworked the code for displaying heart rate with a circular scale. It now uses the standard widget in place of the sensor.
Fixed PAI progress display. Note that the maximum value for the PAI pointer is 525, not 100. This is a feature of the watch, not the editor.
Added warning if files in watch face are in *.bin format.

v13.1

Added ability to make a shortcut to any application in editable items.
Added support for Active 2.
Fixed display of buttons and shortcuts when creating a GIF file.

v13.0

Added autosave (enabled in settings).
Added ability to switch background image by tap.
Added ability to switch background colour by tap.

v12.1

Added transparency for some widgets. Does not work on all models.
Added support for Amazfit T-Rex 3.

v11.2

Fixing the smooth second hand on the GTR4.

v11.1

Updated the digital time widget.
Updated shortcuts widget.
Added new application launch commands for buttons.

v11.0

Completely redesigned the weather widget.
Added weather widget for several days (forecast).
Added support for Bip 5 Unity.

v10.4

Added ability to display month names in a font.
Added Compass widget (works on ZeppOS 2 or later).
Added ability to create *.zpk file (enabled in settings).

v10.3

Added display of hours:minutes:seconds in a single line font.
Added display of date/month/year in one line font (order depends on the watch setting).
Added display of the day of the week in font.
Added new presets for button functions.

v10.2

Added ability to copy widget properties (context menu on the properties field).

v10.1

Added display of time and date in font.
Added widget for adding scripts to watch face.
Fixed bugs in sunrise/sunset operation on circle and at an angle.
Fixed bugs in digital time alignment.

v10.0

]Added support of fonts for data display (after installing such watch faces it is better to restart the watch).
Added possibility to display altitude (in barometer).
Completely redesigned the moon widget.
The arrow pointer for sun and moon should now not be displayed after sunset.
All images are now copied to the watch face, even if they are in folders.

v9.1

Fixed working with Amazfit Balance.
Added support for Amazfit Active.
Added support for Amazfit Active Edge.
Fixed display of distance on a circle.
Fixed displaying sunrise and sunset at an angle.
Added ability to convert images to ARGB format in settings.
Fixed continuous vibration in notifications.

v9.0

Added ability to create shortcuts for a set of images (IMG_LEVEL).
Added support for buttons and presets to launch inbuilt apps.
Added support for Amazfit Balance (not tested).

v8.2

Added ability to display angled or circumferential data for sunrise/sunset, maximum and minimum temperatures (for weather, separate units of Celsius and Fahrenheit only work on newer models).
Added support for Cheetah / Cheetah Pro.
Added support for Bip 5.
Theoretically it is now possible to add support for new models by editing the file in the model_config folder.

v8.1

Added ability to display data at an angle or in a circle for date and time.
Fixed found errors when unpacking dials.
Fixed found errors when working with UHD monitors.

v8.0

Added support for T-Rex Ultra
Added support for GTR Mini
Added the ability to display data at an angle or in a circle (battery, steps, distance, calories, heart rate, PAI, SpO2, stand)

v7.3

Fixed problems with icons in editable items.
Fixed problems with circular progress in editable items.
Added ability to set data rotation angle for some models (ZeppOS 2).
Improved algorithm for unpacking dials that contain additional features. Increased probability of partial dial recognition.

v7.2

Added the ability to change the type of line ending for linear and circular progress.
Added the ability to create shortcuts without using an image.

v7.1

Added independent element with image and top image.
For editable items on the clock, an additional selection in the form of a list is included.
Changed the function of creating an editable element for fat burning.
Fixed motion animation and rotation animation for GTR4 and GTS4.
Added wind direction.
Updated watch face file format.

v7.0

Added smooth second hand (several types)
Added alert every hour
Added the ability to change the direction of rotation of the hour hands
Added the ability to set the sector in which the hour hands work

v6.4

Improved the stability of the bluetooth connection loss notification function
Updated German and Spanish translation

v6.3

Added the possibility of notifications when the connection is broken and restored
Fixed work progress for fat burning
Fixed work progress for the pulse
Fixed bugs in temperature display
Fixed display of shortcuts in AOD mode

v6.1

Added Falcon support.
Changed the algorithm of shortcuts to eliminate conflicts with editable elements.
The configuration of created watch faces has been updated to version 2.

v6.0

Added support for editable background.
Added support for editable arrows.
Added support for editable elements.
Added German translation.

v5.0

Added support for GTR 4
Added support for GTS 4 Mini
Added support for Amazfit Band 7 (not to be confused with Mi Band 7)

v4.1

Fixed bugs when creating and unpacking GTR 3 Pro watch faces

v4.0

Added animation support.
Added Ukrainian language.
Added a tab with some tips on working with the editor.
Added the ability to display the distance in miles.

v 3.0

Added sunrise / sunset
Added barometer
Added stress
Wind added
Added fat burning
Added moon phases

v 2.0

Added weather.
Added workout (stand).
Added oxygen (SpO2).
Added humidity.
Added UV index.
Added the ability to highlight shortcuts when saving gif files (enabled in the settings).
Updated the display of shortcuts in connection with the firmware update on the watch.
Added Italian language.
Added Spanish language.

v 1.1

Fixed loss of error symbol for pulse.
Fixed errors when unpacking dials.
Fixed bug with incorrect model definition for GTS 3.

Version 17.1
Fixed the bugs that were found.
Added support for Cheetah 2 Pro.

Old versions

v 10.0
v 10.1
v 10.2
v 10.3
v 10.4
v 11.0
v 11.1
v 11.2
v 12.1
v 13.0
v 13.1
v 13.2
v 14.1
v 15.0
v 15.1
v 16.0
v 16.1
v 17.0

PS. The interface was translated using an online translator. If someone wants to improve the translation, then write to the PM.

PS2. Many people ask how to install watch faces. For starters, I advise you to read this topic. Personally, I prefer to use this program to install the created watch faces on the GTR 3 (for the GTS 3)

Сollection of code examples for use in watch faces.

Donate to the author - PayPal: [email protected].
Buy me a coffee

[SashaCX75]

1mylord
The arrow pointer cannot move smoothly. It depends on the firmware.

[don1yoor]

Hello guys. How to rotate numbers for GTS 3 ?

[demiurg1]

Please, make a donation to the developer of the software (SashaCX75) for creating watch faces. Who cannot do more, should give him even a small, only symbolic amount of money.
He really needs any such payment now.
I already did it via PayPal using his e-mail address: [email protected].

[demiurg1]

I have such a question. Does anyone know how after the next ZEPP update, you can upload the file with the dial to your smartwatch. So far I used an Android app called "GTR 3" and there, after selecting the "Install own WatchFace" option, I was able to install my watch face using the indicated watch face in Zepp. Unfortunately, this app doesn't work with Zepp 6.9.7. Can anyone advise on this topic besides uninstalling the new version of Zepp and installing the old one?

[FeRu]

Spoiler

I have such a question. Does anyone know how after the next ZEPP update, you can upload the file with the dial to your smartwatch. So far I used an Android app called "GTR 3" and there, after selecting the "Install own WatchFace" option, I was able to install my watch face using the indicated watch face in Zepp. Unfortunately, this app doesn't work with Zepp 6.9.7. Can anyone advise on this topic besides uninstalling the new version of Zepp and installing the old one?

Hey. This is known problem because new ZEPP version changed watchface store and instalation proces. This should be fixed soon in newer version of GTR3 app (I used the same for testing my work). You have 2 options right now: Unistall Zepp and install older version or use Amazfitfacess app to install watchfaces. You can upload private watchface and install by app. It works fine.

[demiurg1]

I chose the second method. I have used the Amazfitfacess app or it is actually "AmazFaces" and it failed. I can only download the ZIP file. I haven't found "Amazfitfacess" anywhere. I also found the "Amazfit WatchFaces" program, but there is the same problem as with the "GTR 3" application. Both programs need the old version of Zepp.

[demiurg1]

In the "AmazFaces" app I can see the correct "Amazfit GTR" watch model and I have chosen the watch face for the GTR 3. "Connect" appears. I click on it, then "Continue" and nothing happens. The watch face does not install. The watch is visible in Zepp and is syncing correctly.

[GIK-Team]

In the "AmazFaces" app I can see the correct "Amazfit GTR" watch model and I have chosen the watch face for the GTR 3. "Connect" appears. I click on it, then "Continue" and nothing happens. The watch face does not install. The watch is visible in Zepp and is syncing correctly.

Leave all comments about the application here: viewforum.php?f=23
Developer reads them and makes all the corrections.

[FeRu]

In the "AmazFaces" app I can see the correct "Amazfit GTR" watch model and I have chosen the watch face for the GTR 3. "Connect" appears. I click on it, then "Continue" and nothing happens. The watch face does not install. The watch is visible in Zepp and is syncing correctly.

In Amazfitfaces app your watch is shown with MAC adress? If not you can add MAC manually in app options and then you will be able to install faces. BT MAC adress is shown in ZEPP app.

[demiurg1]

Thanks a lot. I entered the address manually and it helped right away.

[FeRu]

Thanks a lot. I entered the address manually and it helped right away.

Great

[DvdDs]

Is it possible to create watchfaces for the bip3 with this tool? thank you.

[don1yoor]

please update this tool pleeease

[Evilmind_04]

please update this tool pleeease

Sasha is working hard on the program so have a little patience please.
Big update will come soon.

Remember life ain't easy in Ukraine , no further explanation needed.

[ajulraj]

Is it possible to add mi band 7 support to this tool?

[kwakykwaky1]

Hi, friend ,
mainly health .
The program will wait .
Your friend from CZ

[Guydu91]

Hi, friend ,
mainly health .
The program will wait .
Your friend from CZ

+1 from France.

[ThomasAn.]

Does the GT3 allow for creation of 24hr analog faces ?

In my editor, a 24-hour analog watch face cannot be made. If you write the watch face code manually, then this can be done, but I don’t remember such dials.

Thanks for the tip. Is there a tutorial on how to code this manually ?

Here are a few examples of 24hr dial watches
https://www.watchuseek.com/threads/noon ... es.5244589

I'd be particularly interested in replicating this dial:

Spoiler

[demiurg1]

If you are not in a rush, please wait a bit. In my free time, I will try to design this watch face. If a watch face is made, you will find it under the name "VR PRIORIS EXPLORER".
However, it will not be a 24-hour dial, because Amazfit does not have this option in analog, only as a digital clock.
Are you reflecting on a 12-hour analog clock? Is the time to be additionally given in the digital version?
This would be a watch face for the GTR 3.

[demiurg1]

This watch face is now available for the GTR 3 here:
https://amazfitwatchfaces.com/gtr/view/26229

[ThomasAn.]

If you are not in a rush, please wait a bit. In my free time, I will try to design this watch face. If a watch face is made, you will find it under the name "VR PRIORIS EXPLORER".
However, it will not be a 24-hour dial, because Amazfit does not have this option in analog, only as a digital clock.
Are you reflecting on a 12-hour analog clock? Is the time to be additionally given in the digital version?
This would be a watch face for the GTR 3.

Thank you for that, but I was specifically looking for the 24 hour analog dial, that was the whole point ... how to make the hour marker move at half speed so that 12 oclock is always 12 noon pointing up towards the sky. Otherwise the horizon graphics make no sense (6am needs to be on the left to indicate sunrise and 6pm on the right to indicate sunset, etc)

Regular 12hr dials are no problem, I can do them too.

Again thank for taking the time on that dial though, sorry if I wasn't clear earlier and got you into all this work for nothing.

[demiurg1]

It's my hobby. I did it with pleasure for exercise. In analog 24-hour time, I will not help. I don't even know if it's possible. Regards

[SashaCX75]

Here are a few examples of 24hr dial watches
https://www.watchuseek.com/threads/noon ... es.5244589

Of all the watches found on the link, I was interested in Botta Duo and SVALBARD NOIR AA22. If you provide graphic resources for creating a dial, I can try to make these.

[demiurg1]

If I find some time, I will try to deliver BOTTA elements in black and 24 hours.

[Anoniem]

how to make a smooth second hand?, i tried to unpack a watchface with a smooth second hand but it wont work.