Infocale3_GTR4 V.1.0.16
Compatible with
GTR 4 Idiomas compatibles
en
en
Fecha agregada: 13.01.2024 06:47
Actualizada: 03.02.2024 06:40
156 los usuarios tienen en favoritas
Información Importante para los Usuarios
Tenga en cuenta que todos los diseños de relojes disponibles en este sitio son obras creativas de nuestros usuarios y no están afiliados con marcas o marcas registradas oficiales. Son creados por y para fans, inspirados en fenómenos culturales populares, juegos, películas o series.
Nuestro objetivo es proporcionar una plataforma para la creatividad e intercambio, pero también nos esforzamos por respetar los derechos intelectuales. Si posee derechos de autor sobre cualquier contenido que cree infringe sus derechos en este sitio, contáctenos para tomar medidas apropiadas.
Tenga en cuenta que todos los diseños de relojes disponibles en este sitio son obras creativas de nuestros usuarios y no están afiliados con marcas o marcas registradas oficiales. Son creados por y para fans, inspirados en fenómenos culturales populares, juegos, películas o series.
Nuestro objetivo es proporcionar una plataforma para la creatividad e intercambio, pero también nos esforzamos por respetar los derechos intelectuales. Si posee derechos de autor sobre cualquier contenido que cree infringe sus derechos en este sitio, contáctenos para tomar medidas apropiadas.
Descripción
[Permission for conversion]
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.16 - Added AM/PM indicator to sunrise/set
* v.1.0.15 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.14 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.13 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.12 - Backported editable arc from Infocale3A (lower only)
* v.1.0.11 - Set finer center of angular spread
* v.1.0.10 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.8 - Added AMPM indicators
* v.1.0.7 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.5 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.4 - Fixed incorrect center of angular spread on calorie complication at the Slot5
- Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.2 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.1 - Initial commit
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.16 - Added AM/PM indicator to sunrise/set
* v.1.0.15 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.14 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.13 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.12 - Backported editable arc from Infocale3A (lower only)
* v.1.0.11 - Set finer center of angular spread
* v.1.0.10 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.8 - Added AMPM indicators
* v.1.0.7 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.5 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.4 - Fixed incorrect center of angular spread on calorie complication at the Slot5
- Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.2 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.1 - Initial commit
Etiquetas
digital
date
battery
heartrate
steps
distance
calories
pai
temperature
weather
sunrise sunset
altitude
training load
status icons
editable
clickable
standing
Comparte este watchface
Comentarios
Discusiones recientes de la comunidad
Best watch display for Amazfit faces?
Hello everyone, My name is David and I recently started exploring custom watch faces for my Amazfit watch. I really enjoy trying different designs and seeing how they look on the screen. Something I’ve been thinking about lately is how t...
Convert request multifunctional [GTR 3 Pro]
Thank you very much!...
Convert request
Thank you...
Request for creating watchface for gtr4
Thank you so much it looks great 🙂...
Nice weather icons collection made by me for watchfaces creators [GTR]
Hello guys. I want to share with you with nice weather icons selected by me to create watchfaces for Amazfit smartwatches especialy GTR2/ 2e and T-rex Pro... Thank you for...
Requesting creation of watch face [GTR4]
Thank you so much it is beautiful...
port lk_hdsp
Gracias por su respuesta saludos...
Getting comments ...