Infocale3_GTR4 V.1.0.16
Compatible with
GTR 4 Supported Languages
en
en
Uploaded: 13.01.2024 06:47
Updated: 03.02.2024 06:40
155 users have this item in favourites
Important Information for Users
Please note that all watch faces available on this site are creative works by our users and are not affiliated with official brands or trademarks. They are created by fans for fans, inspired by popular cultural phenomena, games, movies, or series.
Our goal is to provide a platform for creativity and exchange, but we also strive to respect intellectual rights. If you hold copyright to any content that you believe infringes your rights on this site, please contact us for appropriate action.
Please note that all watch faces available on this site are creative works by our users and are not affiliated with official brands or trademarks. They are created by fans for fans, inspired by popular cultural phenomena, games, movies, or series.
Our goal is to provide a platform for creativity and exchange, but we also strive to respect intellectual rights. If you hold copyright to any content that you believe infringes your rights on this site, please contact us for appropriate action.
Description
[Permission for conversion]
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.16 - Added AM/PM indicator to sunrise/set
* v.1.0.15 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.14 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.13 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.12 - Backported editable arc from Infocale3A (lower only)
* v.1.0.11 - Set finer center of angular spread
* v.1.0.10 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.8 - Added AMPM indicators
* v.1.0.7 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.5 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.4 - Fixed incorrect center of angular spread on calorie complication at the Slot5
- Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.2 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.1 - Initial commit
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.16 - Added AM/PM indicator to sunrise/set
* v.1.0.15 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.14 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.13 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.12 - Backported editable arc from Infocale3A (lower only)
* v.1.0.11 - Set finer center of angular spread
* v.1.0.10 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.8 - Added AMPM indicators
* v.1.0.7 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.5 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.4 - Fixed incorrect center of angular spread on calorie complication at the Slot5
- Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.2 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.1 - Initial commit
Tags
digital
date
battery
heartrate
steps
distance
calories
pai
temperature
weather
sunrise sunset
altitude
training load
status icons
editable
clickable
standing
Share this face
Comments
Recent community discussions
LK_HDSP_
https://i.postimg.cc/dVVN8yb2/LK-HDSP.gif Hello everyone, could someone please port this sphere to the gtr_3 model? I'm having problems with my PC and can't do it. Thank you...
Nothing fancy watchface request for gtr4
Hi, would someone please create this watchface face from wear os for Gtr4? If possible with the option of having translucent pointers to be able to see the info under them. If possible the main circle contains digital time. If possible to ...
any body can know how to make backwards clock watchface analog for gts3?
In the editor, use Analogue Time Pro and swap the start and end angles....
watchface request for GTS3
Thank you so much for the information and example....
Martix convert request
Ok sorry about that...
Galaxy watchface request for gtr4
Thank you so much it looks great...
Can anyone help me locate this face
Thankyou so much! I'm trying to find this face again. Does anyone recognise it? It's for a GTS4 mini (new) but may have be...
Getting comments ...