Infocale3 V.1.0.19
Compatível com
Balance Idiomas suportados
en
en
Data adicionada: 13.01.2024 06:43
Atualizado: 03.02.2024 06:34
164 usuários tem esse item em favoritos
Informação Importante para os Usuários
Por favor, note que todos os mostradores de relógio disponíveis neste site são obras criativas dos nossos usuários e não estão afiliados com marcas oficiais ou marcas registradas. São criados por fãs para fãs, inspirados em fenômenos culturais populares, jogos, filmes ou séries.
Nosso objetivo é fornecer uma plataforma para criatividade e troca, mas também nos esforçamos para respeitar os direitos intelectuais. Se você detém direitos autorais sobre qualquer conteúdo que acredita infringir seus direitos neste site, por favor, entre em contato conosco para ações apropriadas.
Por favor, note que todos os mostradores de relógio disponíveis neste site são obras criativas dos nossos usuários e não estão afiliados com marcas oficiais ou marcas registradas. São criados por fãs para fãs, inspirados em fenômenos culturais populares, jogos, filmes ou séries.
Nosso objetivo é fornecer uma plataforma para criatividade e troca, mas também nos esforçamos para respeitar os direitos intelectuais. Se você detém direitos autorais sobre qualquer conteúdo que acredita infringir seus direitos neste site, por favor, entre em contato conosco para ações apropriadas.
Descrição
[Permission for conversion]
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.19 - Added AM/PM indicator to sunrise/set
* v.1.0.18 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.17 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.16 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.15 - Backported editable arc from Infocale3A (lower only)
* v.1.0.14 - Set finer center of angular spread
* v.1.0.13 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.11 - Added AMPM indicators
* v.1.0.10 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.9 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.8 - Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.6 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.5 - Initial commit
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.19 - Added AM/PM indicator to sunrise/set
* v.1.0.18 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.17 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.16 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.15 - Backported editable arc from Infocale3A (lower only)
* v.1.0.14 - Set finer center of angular spread
* v.1.0.13 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.11 - Added AMPM indicators
* v.1.0.10 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.9 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.8 - Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.6 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.5 - Initial commit
Tags
digital
date
battery
weather
steps
distance
heartrate
calories
pai
temperature
sunrise sunset
altitude
training-load
status-icon
editable
clickable
standing
Compatilhar este watch face
Comentários
Bery53
Best watchface ever
13.01.2024 13:38:33 Reclamar
Você precisa estar logado para postar ou responder aos comentários.
Discussões recentes na comunidade
Request to make a watchface tor Active 3 Premium
I confirm in editor don't show weather font but in zepp player and real watch show weather font. I don't edit custom script but i don't find until now something don't fit. [...
Request for creating a watchface for Active 3 premium
I see. Thank you for your response....
Racing Chronograph Watch Face Request [Active Max]
Hi, I’m looking for a custom watch face for the Amazfit Active Max (480 × 480). I really like the design of the S4U RC ONE / RC ONE Racing watch faces available for Wea...
Realtime Pulse Graph balance 2
Thank you, it's perfect!...
Data master watchface balance 2
Thank you, asoo. Everything is ok now except one t...
Request for Active 3 Premium
Hello, Classic example of what age does to one. I didn't notice it. I'm sorry and feel ashamed. I'm extremely sorry. I will not bother you again with any request. Sorry again. But you're work is great. You're truly an artist. Bye...
[Port Request] IWC Schaffhausen for Amazfit Active 2 (Round)
GTR 4 shares the exact screen resolution with Active 2 (Round). Both has 466*466 screen. You can safely sync that watchface in your watch via Zepp Developer mode....
