Infocale3 V.1.0.19
Compatibile con
Balance Idiomas compatibles
en
en
Data aggiunta: 13.01.2024 06:43
Aggiornato il: 03.02.2024 06:34
162 utenti che hanno questo elemento nei preferiti
Informazioni Importanti per gli Utenti
Si prega di notare che tutti i quadranti orologio disponibili su questo sito sono opere creative dei nostri utenti e non sono affiliati con marchi ufficiali o marchi registrati. Sono creati da fan per fan, ispirati da fenomeni culturali popolari, giochi, film o serie.
Il nostro obiettivo è fornire una piattaforma per la creatività e lo scambio, ma ci impegniamo anche a rispettare i diritti intellettuali. Se detiene i diritti d'autore su qualsiasi contenuto che ritiene infranga i suoi diritti su questo sito, contattaci per un'azione appropriata.
Si prega di notare che tutti i quadranti orologio disponibili su questo sito sono opere creative dei nostri utenti e non sono affiliati con marchi ufficiali o marchi registrati. Sono creati da fan per fan, ispirati da fenomeni culturali popolari, giochi, film o serie.
Il nostro obiettivo è fornire una piattaforma per la creatività e lo scambio, ma ci impegniamo anche a rispettare i diritti intellettuali. Se detiene i diritti d'autore su qualsiasi contenuto che ritiene infranga i suoi diritti su questo sito, contattaci per un'azione appropriata.
Descrizione
[Permission for conversion]
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.19 - Added AM/PM indicator to sunrise/set
* v.1.0.18 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.17 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.16 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.15 - Backported editable arc from Infocale3A (lower only)
* v.1.0.14 - Set finer center of angular spread
* v.1.0.13 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.11 - Added AMPM indicators
* v.1.0.10 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.9 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.8 - Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.6 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.5 - Initial commit
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.19 - Added AM/PM indicator to sunrise/set
* v.1.0.18 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.17 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.16 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.15 - Backported editable arc from Infocale3A (lower only)
* v.1.0.14 - Set finer center of angular spread
* v.1.0.13 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.11 - Added AMPM indicators
* v.1.0.10 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.9 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.8 - Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.6 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.5 - Initial commit
Tag
digital
date
battery
weather
steps
distance
heartrate
calories
pai
temperature
sunrise sunset
altitude
training-load
status-icon
editable
clickable
standing
Condividi questo quadrante
Commenti
Bery53
Best watchface ever
13.01.2024 13:38:33 Segnala
Per rispondere ai commenti devi essere loggato .
Discussioni recenti della comunità
Spectrum watchface for balance 2
Thank you, asoo. It's awesome. You take it to another level....
AOD flickering and greenish.
@SleepyHollow Thank you for your reply. But do you find watch faces on the Balance 2 that still exhibit this problem, or has the error been definitively fixed by Amazfit? [/quot...
OMG 474 X ( BipMAX ) for balance 2
Hello to all and have a nice week. Can someone with skills from the creators convert this lovely watchface from asoo for balance 2? I haven't the knowledge to convert it myse...
LiveView and Modular 3P for balance 2
Thank you for all, asoo!...
Request for Pokémon Watch Face Conversion [Balance 2]
Contact the author. https://amazfitwatchfaces.com/gtr/view/27663...
Speedometer and DG25FS for Balance 2
Hello to all and have a nice weekend. Can someone from the creators make these awesome watchfaces from asoo for amazfit balance 2? Thank you and a big thanks to asoo for his ...
A watchface for Balance similar to this one from Pebble
Hello I just wanted to ask if anyone would be willing an able to build this fantastic Pebble watchface for the Amazfit Balance 3/Ultra. There are some pretty good versions alread...
