Infocale3 V.1.0.19
Compatible with
Balance Idiomas compatibles
en
en
Fecha agregada: 13.01.2024 06:43
Actualizada: 03.02.2024 06:34
162 los usuarios tienen en favoritas
Información Importante para los Usuarios
Tenga en cuenta que todos los diseños de relojes disponibles en este sitio son obras creativas de nuestros usuarios y no están afiliados con marcas o marcas registradas oficiales. Son creados por y para fans, inspirados en fenómenos culturales populares, juegos, películas o series.
Nuestro objetivo es proporcionar una plataforma para la creatividad e intercambio, pero también nos esforzamos por respetar los derechos intelectuales. Si posee derechos de autor sobre cualquier contenido que cree infringe sus derechos en este sitio, contáctenos para tomar medidas apropiadas.
Tenga en cuenta que todos los diseños de relojes disponibles en este sitio son obras creativas de nuestros usuarios y no están afiliados con marcas o marcas registradas oficiales. Son creados por y para fans, inspirados en fenómenos culturales populares, juegos, películas o series.
Nuestro objetivo es proporcionar una plataforma para la creatividad e intercambio, pero también nos esforzamos por respetar los derechos intelectuales. Si posee derechos de autor sobre cualquier contenido que cree infringe sus derechos en este sitio, contáctenos para tomar medidas apropiadas.
Descripción
[Permission for conversion]
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.19 - Added AM/PM indicator to sunrise/set
* v.1.0.18 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.17 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.16 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.15 - Backported editable arc from Infocale3A (lower only)
* v.1.0.14 - Set finer center of angular spread
* v.1.0.13 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.11 - Added AMPM indicators
* v.1.0.10 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.9 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.8 - Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.6 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.5 - Initial commit
1. Basically, I will not accept for any modifications of both styling and pixmaps while converting.
2. Send me a PM about conversion with these info:
* The link of your best accurate converted face in this site.
* The JS source code for your actual target device (if you already had).
3. Give me a couple of days to review those sources.
4. I will reply your PM whether your request has been accepted or denied.
5. If accepted, I may or may not send you some PMs for a request to rewrite if needed.
* Anyway JS merge request for conversion is always welcome.
This is a fork of the legendary "Infocal" 1st-gen. That would be the most popular watchface on older Fenix series.
* 7 colours supported (red, amber, lime, cyan, azure, lavender, and grey)
* 5 curved complications are all editable (heartrate, steps, distance, calories, daily-PAI, standing, current temperature, hi/lo temperature, weather forecast, altitude, sunrise/set, training-load, world-clock, and battery)
* those complications have their own click zones
* 1 editable arc (heartrate, steps, calories, training-load, standing, battery, and empty)
* Date widget has calendar click zone
* Seconds below the minutes
* 2 status messages ("ALARM" above the hours digit, and "BT-OFF" below the hours digit)
[known issue]
* Weather forecast sometimes lacks its accuracy compared with the stock weather data-type.
[Changelog]
* v.1.0.19 - Added AM/PM indicator to sunrise/set
* v.1.0.18 - Fixed inconsistent time formatting in world-clock
- Fixed incorrect AM/PM switching trigger in world-clock
- Fixed incorrect click type in standing
* v.1.0.17 - Fixed incorrect AM/PM switching trigger (an hour delayed)
* v.1.0.16 - Added "world clock" complication to slot 1 to 5
- Only 1 city is supported (listed at the top)
- City name -> first 3 chars
* v.1.0.15 - Backported editable arc from Infocale3A (lower only)
* v.1.0.14 - Set finer center of angular spread
* v.1.0.13 - Re-designed curved complication font images completely. This introduces a bit shorter but wider, bolder and sexier design, and this also brings more longer chars.
- Changed the position of AMPM to the tail of minutes when "Right Hand" was selected
* v.1.0.11 - Added AMPM indicators
* v.1.0.10 - Increased max char-length of weather forecast
- Added a space between 'rise' and 'data' on sunrise/set complication
* v.1.0.9 - Added "Hi/Lo temperature" complication
- Updated temperature preview icon
* v.1.0.8 - Cleaned up forecast function
- Added 7th configuration "Style":
* "Left Hand" or "Right Hand"
* Left Hand = centered hours, right-upper minutes, date, and seconds
* Right Hand = centered minutes, left-upper hours, date and seconds
* This also swaps the position of Slot5
* CAUTION: in EDIT page, the position of Slot5 contents doesn't move to actual position (stays 10 O'Clock direction even if the "Right Hand" was selected)
* v.1.0.6 - Fixed truncated tooltips issue by moving them to upper-side (Slot1 to Slot3)
- Added Standing complication to all slots
* v.1.0.5 - Initial commit
Etiquetas
digital
date
battery
weather
steps
distance
heartrate
calories
pai
temperature
sunrise sunset
altitude
training-load
status-icon
editable
clickable
standing
Comparte este watchface
Comentarios
Bery53
Best watchface ever
13.01.2024 13:38:33 Queja
You need to be logged in to post or reply to comments.
Discusiones recientes de la comunidad
Spectrum watchface for balance 2
Thank you, asoo. It's awesome. You take it to another level....
AOD flickering and greenish.
@SleepyHollow Thank you for your reply. But do you find watch faces on the Balance 2 that still exhibit this problem, or has the error been definitively fixed by Amazfit? [/quot...
OMG 474 X ( BipMAX ) for balance 2
Hello to all and have a nice week. Can someone with skills from the creators convert this lovely watchface from asoo for balance 2? I haven't the knowledge to convert it myse...
LiveView and Modular 3P for balance 2
Thank you for all, asoo!...
Request for Pokémon Watch Face Conversion [Balance 2]
Contact the author. https://amazfitwatchfaces.com/gtr/view/27663...
Speedometer and DG25FS for Balance 2
Hello to all and have a nice weekend. Can someone from the creators make these awesome watchfaces from asoo for amazfit balance 2? Thank you and a big thanks to asoo for his ...
A watchface for Balance similar to this one from Pebble
Hello I just wanted to ask if anyone would be willing an able to build this fantastic Pebble watchface for the Amazfit Balance 3/Ultra. There are some pretty good versions alread...
